Changeable Frame

The frame is very similar to the profile suspension, making it very easy to hang with different options.

Available for: Photo in a Changeable Frame

Features

• Visible frame (aluminium) on the front: width approx. 6 mm
• Hang using screws, hooks or a rope hanging system
• Available for all formats
• Can be hung directly on the wall on nails without any additional accessories
• 14 mm frame: 8 mm distance from the wall to the inner back side
• 38 mm frame: 32 mm distance from the wall to the inner back side

Assembly instructions

Materials required:

• Your Wall Art in a Changeable Frame
• A pencil
• A level (optional, but useful)
• A tape measure
• Screws, hooks, or a rope hanging system for wall installation (consider the weight of the frame and the wall material when choosing)
• A screwdriver or hammer, according to your chosen wall fasteners

1. Choose where you want to hang your Wall Art. Mark the spot lightly with a pencil where you want the art to be.
2. On the back of the Changeable Frame, measure the distance between the two points of the subframe where your screws, hooks, or rope will connect.
3. Using the point you've marked, and the distance you've measured between the two points on the subframe, mark the two spots where the screws, hooks, or rope will be attached to the wall. This is a good moment to use a level and make sure the two marks are aligned.
4. Using a screwdriver or hammer, carefully install the screws or hooks at the spots you marked, or set up your rope system. Leave a portion of the screws or hooks protruding from the wall for the frame to hang on, or ensure the rope is taut and securely fastened.
5. Align the subframe on the back of the Changeable Frame with the screws, hooks, or rope on the wall, and gently hang your Wall Art. Once the Wall Art is hanging, step back and look at it from a few different angles to make sure it's straight and at the desired height.

Congratulations your Wall Art is now hanging on the wall.

How to change your image in the Changeable Frame

When you are ready to change the image you want to display in the Changeable Frame, you can do it easily.

1. First of all, choose one of the sides of the frame. It’s not necessary to remove all the screws: you only need to remove two screws, and you will then be able to remove one side of the Frame.
2. Afterwards, carefully slide the print out from the side you have opened, and insert the new print.
3. Place the screws again, and the Wall Art will be ready to hang again!